Okay, so you’ve got everything into a single file and you’re now ready to put it into a format that will be acceptable to Amazon for upload into their Kindle publishing platform. This is not a difficult process, but one that must be done correctly, according to Amazon’s rules. So long as you take each step in turn, you shouldn’t have a problem. It might seem complicated at first, but once you’ve done it a few times, it will be easy. So let’s get started shall we?
The first step is to change the paragraph layout. First, do a global highlight by clicking ctrl + A to highlight the entire document. This will make sure that the changes you’re about to make will be made to the entire file. To do this, you will be making use of the Paragraph Layout box. In my version of Word, it is located along the top of the page, but yours could be different and you might have to look around to find it. It will be called, Paragraph.
Click on that and another box will open.
Enter the details into the various boxes as in my example above, then click OK. Your file will now have equal margins down either side, with the first line of each paragraph indented, and the lines spaced nicely apart from each other.
The next part only applies to those people who have put a blank line in between two paragraphs, to signify a change of character or scene etc. If you never do this, skip to the next bit. If, like me, you like the breathing space offered by such a line space, read on.
You will find that your original blank lines have now disappeared, thanks to the global justification you just did, so you will need to refer to your original file when placing the spaces back in again. What you will be doing is putting in a slightly bigger space between two paragraphs to represent the blank line you originally put in. You have two options:
Put the extra space below the paragraph before the space, or above the one after. The choice is yours but it pays to always do it the same way to avoid confusion. I do it below the paragraph before the space, so my screenshots will indicate this. The process is called, Hanging Paragraphs and is a much neater way of putting in the blank lines than simply by hitting enter again.
Highlight the paragraph immediately before where you want the blank space to be, then click on the Paragraph box again.
You will notice that a value of 12 has now been placed in the ‘After’ box, under Spacing. If you are working with the paragraph after the space, put the 12 in the ‘Before’ box. Click OK. You will notice that the two paragraphs move slightly further apart. It looks professional, far more so than simply entering another carriage return.
Now work through the entire file, doing the same thing wherever you want a blank line between two paragraphs. Only use the blank line to indicate a change of scene, a new character’s point of view, a jump in time etc. Less is more.
Now we move onto to your chapter headings. It is time to move them to the centre.
Highlight your chapter heading and click the Paragraph box. In the very first box, under ‘General,’ change ‘Justified’ to ‘Centred.’
Underneath that, under ‘Indentation, Special,’ change the setting to ‘None’ as in my example above. If you do not remove the ‘first line’ indent setting, your centring will be slightly off to the right.
Work through all your chapter headings the same way. If you end your book with The End, you can do the same there too. You can also do your front matter and end papers, if you want them centred. At least have your title page and dedication centred, if nothing else. What you don’t want centred, leave justified.
INSERT PAGE BREAKS
Go back to the beginning of your file. Remember I told you that a kindle book doesn’t have pages like a physical book does? Well now we have to tell it that our file has some parts that we wish to be treated as separate units, a bit like pages. What you will do is insert a page break at any appropriate point where you wish the Kindle device to treat it as a separate piece of work, aka a page.
Directly beneath your title page, on a new line, go to your Insert option. As in the first pic at the top, mine is along the top of my Word page, but yours may be part of a clickable menu list. When you find Insert, click Page Break. You will see a dotted line appear across the page, beneath your title page, in the centre of which, it should say, ‘page break.’
Do the same after each page of your front matter, your copyright page, dedication, acknowledgements etc. Then do the same at the end of each chapter, before the new chapter heading. Finally, do the same after each page of your end papers, if you have any. You don’t need to put one right at the very end of the file, as it’s the end anyway.
TABLE OF CONTENTS
This is not strictly necessary, but it does give a more professional look and feel to your Kindle book, and readers will like it. I feel it’s worth the effort of putting it in, but it’s up to you. If you don’t want to, skip this bit.
The Table of Contents, or TOC for short, is placed immediately before your first chapter, and is a list of every chapter and page of interest in your book. Here you will list your chapter headings, your About the Author, your Coming Soon, etc. It enables the reader to go anywhere within the Kindle book by way of a simple click, rather than by scrolling through. I have been led to believe that some E-readers put a version of a TOC in automatically, but as with everything connected with my writing, I like to be in control.
The TOC consists of two parts; the list of contents, and the ‘back to top,’ at the end of each separate section. It is relatively straightforward, but there is a lot of highlighting and clicking involved. Before you start, make sure you will not be disturbed for half an hour as to get something wrong here will infuriate your readers. If they want to go to chapter seven, they don’t want to find themselves at chapter ten because you weren’t paying attention.
Place your TOC immediately before your first chapter heading, your Chapter One, after the preceding page break. Title it, Table of Contents, or simply, Contents. Then list your chapters by name, Chapter One, Chapter Two etc. If you have named your chapters, keep them as Chapter One, Two, Three etc in the TOC. After your chapters, list your About the Author and Coming Soon, and any Acknowledgements etc you may have as end papers. Put another page break after it.
Now comes the tedious bit. What you have to do is make each of the entries within your TOC into a clickable link. Those links will then take the readers to the right places within your file. This is achieved by using Bookmarks and Hyperlinks. You start by highlighting your chapter heading. Then click ‘Insert’ and navigate to ‘Bookmark.’
A box will appear, like this:
Before you begin, click ‘Hidden Bookmarks’ and see if anything appears within the box. If so, highlight and delete everything. If not, great. Highlight your chapter heading, then enter the name of the bookmark, in this case, something along the lines of ‘chap1’ will do fine. There should be no spaces within the name. Click ‘Add.’
Navigate to Chapter Two and scroll back to just above the page break and enter, ‘back to top.’
Move to Chapter Two and highlight it. Enter a bookmark, ‘chap2’ or something similar.
Go through the whole file, making sure to enter your ‘back to top’ at the end of each chapter, just above the page breaks. Put them also at the bottom of each of your endpapers. Your endpapers can have bookmarks that tell you what they are, as in my example above. ‘Soon,’ About,’ etc.
At the very end of the file, put another ‘back to top.’
Go back to your TOC.
Highlight the title of your TOC and enter a bookmark ‘refTOC’ or simply ‘TOC’ will do.
Now you will link those bookmarks to your TOC, creating clickable links. Highlight the first entry of your TOC, Chapter One. Navigate to ‘Insert,’ then click ‘Link.’
Clicking Link will produce a further box.
You should see all of your carefully entered bookmarks listed. First, make sure to click ‘Place in this document’ down the left hand side. Scroll to your ‘chap1’ bookmark and click it. Then click OK. You should notice the first entry in your TOC has now turned blue, indicating that it is now a clickable link.
Now work through your TOC, highlighting each entry in turn and linking it with the correct bookmark. When you’ve finished, each entry in your TOC should be blue, indicating they’re all clickable links.
You now need to make the links that allow readers to go back to the beginning of the document. This is where you will make all of those ‘back to top’ entries into links.
Go the end of Chapter One and highlight ‘back to top.’ Open the ‘Link’ box and link it with the bookmark titled, ‘TOC’ or ‘refTOC’ or whatever you called it. When you click ‘OK’ you should see the ‘back to top’ go blue.
Work through the entire file, making all the ‘back to top’ entries into links in the same way.
All that’s left for you to do now is to check each TOC link works properly and takes you to the right place. Once you’re satisfied, you’re done.
Congratulations, you’ve just formatted your own Kindle book. Now go to Amazon, upload it, and crow to your friends about how clever you are.